Estimated Time to Complete: 15 minutes
Tools Required:
5mm wrench
Parts Required:
New brake pads: Purchase here
Caliper: Purchase here
Break Pad Replacement
Your first step will be to remove the caliper from the disk. You will need to loosen the bolt on top of the caliper lever before then unscrewing the screws that hold the caliper on the disk. Once the screws are off, remove the caliper from the disk.
Using the brake pad tabs, pull out the old brake pads from the caliper and place in the new ones.
Place the caliper with the new brake pads over the disk. Re-insert the screws to fix the caliper and place. Finally, re tighten the lever so that the pad is as close as possible to the disk without touching.
Caliper Replacement
Caliper replacement will follow the exact same steps as replacing the brake pads except the brake pad swapping. We generally recommend replacing the full caliper instead of doing just the brake pad replacements.