BARN FIND 1000hp ls engine is NO GOOD!!! learn from my mistake!!!



NEW ONLINE STORE!!!

Follow The LS NastyChannel:
@ls.nasty

LS Nasty
700 N 13th St
Erwin NC 28339

Subscribe, comment and like
Follow Me!!!
Facebook:
Instagram: John_Doc1
Instagram: cowmaro
Instagram: LS Nasty

DEVIN’s CHANNEL…. HOLLEY INFO!!!!!

Check out Moore Race Chassis

For all Apparel Needs

49 Comments

  1. John I have. 6.0 LS with 823 heads made 877wrhp on 21 psi 16 degrees on dynojet I have a foxbody mustang weigh 2710 with me in it it has vs racing 88/103 88 mm arp head stress 327 gear powerglide with 1.69 gear Holly Terminator x ls9 heads summit rods and Pistons stock crank someone told me that 823 heads is it is limited at twenty one pounds is that true question is how far can I push the 823 heads

  2. go look at 187 customs yt they had a wrist pin literally shoot out the side of the block from a button failure, it can happen

  3. Turbo bullet is the same as Facebook market place in Australia. A bunch of rip offs. Well it keeps you giving us content John. Mat has job security.๐Ÿคฃ๐Ÿ†’๐Ÿคœ๐Ÿค›๐Ÿ”ฅโ˜๏ธ๐Ÿ‘๐Ÿค™๐Ÿคž๐Ÿคž๐Ÿ™๐ŸคŸ๐Ÿ’ฏ๐Ÿ‘๐Ÿ‘‹๐Ÿค‘

  4. Great vid, did you guys see the Isky cylinder O-ring tool.? maybe we can learn…

    …how to machine top fuel hoops at home. John & Matt, please do a vid on this.

  5. Didn't Logan say in the last video that you hadn't bought it yet? I would rewind the last video and tell him that he is so right. Who needs friends when you can have a Logan Paul in your life. LOL!!!

  6. I love the sneezing covid, when everything first started I said it so much my wife yelled it in a grocery store. Now here I am with covid wishing I could go to work. Keep up the good work guys๐Ÿ‘

  7. I know you said it wasnโ€™t a planned, so why wouldnโ€™t you take your own advice and buy a quality built short block from your bros at TKM? Doesnโ€™t make much sense John, or Logan. Actually, I can remember the majority of the projects on the channel have been bs, wether just an engine or a whole damn car like Charlie Murphy or the Black Sheep original big Hemi. Turbo Bullet or Friends, it doesnโ€™t matter as they will all pass along their problems like you said. Very sad!

  8. Been there done that also !! And it seems like when I find a good deal on parts, the money I have to end up putting into them to make them right is much more expensive than buying new parts. SMH

  9. Not saying that the person that built the motor is doing this but one way to help put an end to the dishonesty is to call the people out , put them on blast and tell the people to avoid them or at least have their radar up that something something amiss with stuff said person sells

  10. I love the channel it's always learning something hate for your inconvenience but I love it we learn more every time you do something ๐Ÿ’ช๐Ÿ’ช๐Ÿ’ช๐Ÿ’ช๐Ÿ’ช๐Ÿ˜Ž๐Ÿ˜Ž๐Ÿ˜Ž๐Ÿ˜Ž๐Ÿ˜Ž๐Ÿ˜Ž๐Ÿ˜Ž๐Ÿ˜Ž๐Ÿ˜Ž๐Ÿ˜Ž๐ŸŒž๐ŸŒž๐ŸŒž

  11. 7k is alot of money to me lol I sat down earlier and done my best to add up what my 403 cost not counting fuel injectors. Summit Ls pro crank,rods and Pistons,bearings and fasteners, decked stock LSA heads,valve train basically o.e shit except for the cam,springs,push rods, Holley low ram 16 injector intake, the ls2 block Wich was in amazing shape and what little machine work it needed cleaned .05 over decked and new cam bearings (no I put the short block together) I'm guessing its between 4500-5500 bucks because I slowly gathered the parts and it does have used parts intake rails and TB, heads, balancer that I got decent deals on its the second motor I've built. I know for a fact I had around 3500 in my old Ls1 I built with junk and it's still running after I beat the shit out of for almost 11 months

  12. Stop buying shit on turbo bullet and markertplace Jon.. dang man come on how many times you gotta get burned before you just do like you say and just handle all business through Kevin and Tkm????

  13. A ball peen hammer should be nowhere near an engine. You need a plastic dead blow hammer and why would you ever be banging on a ratchet.
    Even โ€œtappingโ€. All completely unnecessary.

  14. I'm definitely buying parts from tkm they are friendly and have very good knowledge. One day when I start making power I'll get a full motor from them

  15. And that folks is why you buy a block buy all parts take it too a machine shop have everything marked and set for what you got and if you donโ€™t wanna spend the money to pay them to stick it together bring it home and do it yourselfโ€ฆ I never buy complete engines. If you know what you want to make, you can built it pretty cheap just have all your machine work done..Iโ€™d be findout wtf put that thing together! Thatโ€™s bs.

  16. That good old moly assembly lube from Oreillys.. ๐Ÿคฆโ€โ™‚๏ธ and if I forked out the coin on used stuff Iโ€™m pulling it apart to check it anyway.. we all donโ€™t have johns bank account and sponsors and sugar daddyโ€™s. And why is everything click bait with this guy?

Comments are closed.